how to cut crown molding for kitchen cabinets video

Place the first piece of moulding upside down on the saw with the scrap end to the right.To obtain the ceiling slope, measure the angle between the wall and ceiling at a location where the top of the wall is horizontal.In fact, you can cut the compound angles.Titebond no run, no drip wood glue provided by titebond.Set your miter saw to bevel (tilt) left at 33.9 degrees.

Highlight the leading edge of the molding with a pencil.Ask this old house general contractor tom silva installs crown molding on kitchen cabinets with full overlay doorssubscribe to this old house:Do not cut the line, leave it.Use the divided angle measurement to set your saw to the correct degree.[6] 3 move the blade to the left to create left corners.

Brace the flat top of the moulding on the base of the saw and the flat bottom of the moulding against the saw's fence.Tom silva shares some tricks of the trade for cutting crown molding precisely to create a scarf joint and outside corners.For outside right corners, save the left side of the cut.Use one long strip for a row of cabinets that are all the same depth.This method of cutting crown molding can be done with any miter saw.

For inside right corners, save the right side of the cut.